PERCH FISHING RIG | How to tie a perch float rig
You will need...
• 3AA bodied waggler
• 5lb mainline
• 4lb hooklength
• Size 10 Nash Fang Uni hook
Here’s a precisely set-up float rig to eliminate the resistance perch hate, which also has the benefit of working well for targeting even larger species
Perch are very obliging fish that can be caught in many different ways, but one of the finest has to be on float-fished worm or prawn.
These larger baits help to deter small fish from picking up your bait giving you a good chance of latching on to a larger than average specimen.
Perch do not like a moving bait, so it is much better to nail it to the lakebed by fishing slightly overdepth with a small shot to anchor the float in position.
Having plenty of shot down the line also helps to keep the rig in place and stop it from being moved around.
Perch bites are normally very bold, but with this rig you can shot the float down so that only the tip is showing when the No.4 shot rests on the bottom.
Should you cast out too far, the shot will not be on the bottom and the float will disappear, telling you that you need to fish a little closer. This rig will also work well for other larger fish – bream, tench and carp.
1. Lock the float in position with two BB shot. These shot should not be pinched on too hard, so they can be moved to adjust the depth once you start fishing
2. The bulk of the shot, made up of several BBs is positioned at just over half depth. This group of shot will get the hookbait down quickly and give the rig stability
3. Tie a double overhand loop knot in the end of the mainline. The loop should be about 2cm in length. The hooklength will later be attached to this
4. Cut off 45cm of 4lb clear line to make the hooklength. It is important to use a hooklength that is lighter than the mainline in case you need to pull for a break
5. Tie a size 10 hook on to the hooklength using a spade-end knot that has first been passed through the eye. This is a very strong knot, ideal for hook with large eyes
6. Next, tie a simple double over-hand loop in the end of the mono hooklength. The hooklength should ideally be about 20cm in length once finished
7. Add a No.4 shot 12cm above the hook. When setting the depth ensure that this shot is on the bottom to secure the hookbait in place
Large baits such as lobworms help to pick out the bigger perch in your swim