Commercial Fishing Tips | Bread punch for winter carp with Lee Thornton

CARP and F1s are known to stop feeding for much of the winter. Yet a single piece of punched bread can produce the goods consistently, especially in matches, where the fish tend to move around less owing to angling pressure on the bank.

The reason a hookbait sat on its own works is simple to understand. During the colder months carp do not need to eat much at all. Being cold-blooded creatures, they do not use anywhere near the amount of energy that they do in the warmer months to get through the day.

As a result, these carp become conditioned to move away from any feed being introduced or a bait that is stationary on the bottom. I’m not quite sure whether a reluctance to feed is a response to avoid being caught or not, but I have a hunch this is most likely the reason.

Therefore, a single attractive hookbait can outscore all other methods, and bread is a timeless classic to stick on the hook to get your fair share of fish.

Punch size.jpg

It’s not easy, though. Bread fishing does seem to have got more difficult over the years. Fish which get caught on it regularly will do everything they can to avoid making the same mistake again.

As a result, every aspect of your approach and set-up becomes crucial to success.

Fish a long line

A long line between the float and pole-tip lets me keep the tip well away from any fish, reducing the chance of spooking. A low-profile Ghost top kit along with that length of line gives me flexibility in the rig to change depths quickly or to swing the rig past the pole-tip. I do, though, prefer two sizeable back shot on this to stabilise everything.

Main.jpg

Location 

Now we move on to the single most important aspect of bread fishing. A feature where the fish can back off to – be this a bridge, a floating island, the far bank, reed beds, aerators or trees – is the perfect starting point, so long as there’s around 3ft of water. This is the depth carp and F1s commonly like to have over their backs in winter to feel comfortable. 

That said, I do set up two rigs, one for fishing 2ft 6ins to 3ft deep and another that can be fished with a good length of line above the float, set 6ins to a foot off bottom in the deepest area of the peg. 

Catching a few extra fish in these deep areas has won me several matches over the years, basically by fishing in a part of the peg with no obvious cover or any good reason for fish to congregate there. 

Carp.jpg

Explore the swim

It’s important not to spend too long in areas that do not quickly deliver indications of fish. When you catch on bread, I don’t believe it’s common to catch just one carp. You are targeting a shoal of fish, which means there are a few in the area. Even if a proper bite is not forthcoming, areas where you get small indications and movements on the float are most likely to produce a positive bite. 

Depth is important too. I’ve already said that 3ft is a good starting point, but you need to be at precisely the same depth as the fish to give yourself the best chance of a bite. Carp will not follow a piece of bread deeper or shallower from where they are comfortable. It’s the angler who adjusts the rig if no indications are forthcoming that catches the most fish. 

When starting a session, I give each area two or three minutes to see if I can get indications. If not, I move around the peg a metre at a time and when I think I’ve located a shoal of fish, that’s the time to start altering the depth.

Rest each area

I have found in the last couple of seasons that once I’ve found a spot with some carp, it pays to not keep going into the same area every time. 

I don’t think that this is because the fish have ‘wised up’. It’s more that the milder winters we are having means that even though the fish are still in a non-feeding mood, water that is a degree or two warmer makes them more inclined to move around or swim out of the peg than if it were colder and they were more lethargic.

It’s quite difficult to do this if you only have one area in a swim where it is possible to get bites, but definitely try resting the catching area regularly, even if it does mean fishing where it seems there is little to no chance of a bite. 

This ploy can actually produce more fish in the longer run.

Floats and shotting

I like to use a traditional 4x12 commercial-style float with a long teardrop shape and a 1.5mm thick plastic bristle and carbon stem for my bread fishing. 

The carbon stem keeps in touch perfectly with a single bulk of shot, which is more often than not fixed just beneath the float. This stem also produces less resistance than a wire stem as it naturally supports less weight. 

The 1.5mm bristle allows the rig to hold the bread hookbait without being overly buoyant or, conversely, too sensitive – which would result in it being pulled under the surface. 

Shotting beneath the float is made up of a bulk of two or three tiny No12 shot (the number used depends on how shallow the fish are). The name of the game is to achieve a really slow fall of the hookbait that will grab the carp’s attention.

Rigs.jpg

Terminal Tackle

Mainline is Middy Lo-Viz 0.18mm, a line I use for every rig in summer or winter as it is one less thing to worry about. Hooklengths are made up of 0.10mm or 0.12mm Lo-Viz with a size 16 6313 hook.

Elastic choice is important, and although the carp can be big, it is best to fish with as soft an elastic as the size of fish will allow. This helps to keep disturbance in the peg to a minimum. For F1s this means the 6-9 Orange Middy Reactacore and for carp the 9-12 Cerise-coloured version.

Staying on the subject of elastics, it is worth noting that in low temperatures, solids will out-perform hollows due to the elastic not reacting the same.

If you are doing a lot of winter fishing it is definitely worth having some top kits with solid elastic rigged up as a back-up!

Lines.jpg
Elastics.jpg
Hooks.jpg

Plumbing up

Plumbing up is crucial, mainly to make sure that the water you are fishing is not too shallow. Very rarely will fish sit in shallow water when it is cold and clear, so making sure at least 2ft and preferably 3ft is available is paramount.

Plumbing up also helps you to locate fish. Many times in winter, because of how tightly the shoal sits, fish can be hit with the rig, and this can happen in really unexpected places in the swim. So use this information to help you locate some carp

Catch.jpg

Jamie Hughes guide to using popped-up bread to catch more carp in winter

There aren’t many tactics that will tempt bites from sluggish commercial carp at the moment, but popped-up bread is one that can bring a response says Jamie Hughes..

Carp like this just love bread in winter.

Carp like this just love bread in winter.

With their appetites hit by the freezing conditions, mirrors and commons are proving hard to fool – but Jamie Hughes has kept the rod-tip hooping round by combining rod and line tactics and this supermarket favourite.

There’s more to it than just chucking out a bit of bread and hoping for the best, and this week the MAP-backed star reveals his winning approach with winter carp.

 

Big baits

“It’s understandable why people would instantly go for a small hookbait but something big is much better,” said Jamie.

Discs of bread presented on hair

Discs of bread presented on hair

“It will stand out a mile in the clear water and a big carp or F1 can slurp up a big mouthful of bread with minimal effort.

“I punch out discs of bread and then thread them on to a hair rig. I will have no hesitation in using up to six discs at once to make a really obvious bait.

“The buoyancy of the bread will pop it up off the bottom. The lead will sink to the lakebed, taking the bread with it, and the bait will then pop up.

“If you use a foot-long hooklength, that is how far off bottom your bait will be presented.

“Sometimes I will place half a 6mm Bag ‘Em Matchbaits pop-up boilie on the hair rig as well to make it even more buoyant.”

 

Vary the depth

“The coldest water in the lake will sometimes sink to the bottom and with this in mind, fish could be sat up in the water in the warmer layers. It’s a matter of trial and error to find out where they are.

“I will start popping the bait up six inches and will keep increasing the length of my hooklength until I start getting indications.

“Don’t be surprised if you end up catching with the bread popped up three foot off the deck.”

Click on the image for more on how Jamie fishes with bread for carp

 

No-nonsense tackle

“You might only get a handful of bites so you need to have faith that your tackle is up to landing every single fish.

A sliding olivette creates less disturbance than a tradtional bomb or feeder.

A sliding olivette creates less disturbance than a tradtional bomb or feeder.

“Mainline is 5lb MAP Optimum to 0.15mm Power Optex for F1s and small carp or 0.19mm for proper carp, finished off with a size 16 eyed PR36 hook.

“I also use an inline olivette instead of a traditional leger, stopped at the hooklength by a quick-change bead. . It creates less disturbance when hitting the water but is just as aerodynamic as a bomb for casting.

“I carry a range of sizes, from 4g up to 12g, but on a typical commercial fishery where you’ll only be casting 30 yards or so, an 8g olivette will do nicely.”